Air Lift LoadLifter 7500 XL, Руководство по установке

Страница: 14 / 28

MN-1033
12
fig. D.19
fig. D.20
fig. D.22 fig. D.23
3 . Insert a 5/16"-18 x 1" carriage bolt (BB) through the square hole in the lower bracket
cup (B) . Make sure to insert the carriage bolt on the flanged side of the bracket . Set
the assembly onto the lower bracket main plate (A) making sure the lower bracket
cup (B) is on the flanged side of the bracket (Fig . D .19) .
4 . Flip the assembly over and cap the 5/16"-18 x 1" carriage bolt with a 5/16” flat
washer (FF) and 5/16” thin nylon lock nut (HH) (Fig . D .20) . Tighten the nut only tight
enough so that the cup still swivels on the lower bracket main plate (Fig . D .21) .
5 . Insert one of the 3/8”-16 x 10” carriage bolts (DD) into the lower bracket assembly
previously assembled (Fig . D .22) . Determine which holes correspond with either side
(Fig . D .23) .
A
BB
B
Bottom of lower bracket . Top of lower bracket .
Passenger’s (right) side,
use this hole
HH
FF
DD
Driver’s (left) side,
use this hole
fig. D.21
LoadLifter 7500 XL
12