Air Lift LoadLifter 7500 XL, Руководство по установке

Страница: 21 / 28

MN-1033
19
ATTACHING THE LOWER BRACKET TO THE AXLE
1 . Push the lower bracket up against the stock U-bolts so that the legs of the lower
bracket are locked into position around the stock U-bolts (Fig . D .44) . It may be
necessary to rotate the lower bracket on the jounce bumper strike plate in order to
do this .
2 . Make sure the cup on the bottom of the lower bracket is nested onto the jounce
bumper strike plate and the flanges of the cup are touching the strike plate on both
the front and back side (Fig . D .45) . If it does not sit on the jounce bumper strike plate
correctly, the cup swivels on the main plate . Rotate or move the cup to obtain this
condition .
3 . Position the U-bolt around the leaf spring assembly and insert in the hole closest to
the leaf spring stack (Fig . D .46) . The lower bracket flanges must be locked on the
front and rear of the stock U-bolts holding the leaf springs to the axle .
fig. D.44
fig. D.45
fig. D.46
Use closest hole to
the leaf spring .
Make sure the cup is
seated onto the jounce
bumper strike plate
forward and behind the
axle .
Rotate the lower
bracket on the spring
perch if necessary and
push the bracket up
against the U-bolts to
put the lower bracket
into position .
LoadLifter 7500 XL
19