Agrowtek GrowControl GCX Скачать руководство пользователя страница 78

Страница: 78 / 78

Agrowtek Inc. warrants that all manufactured products are, to the best of its knowledge, free of defective

material and workmanship and warrants this product for three (3) years from the date of purchase. This

warranty is extended to the original purchaser from the date of receipt. This warranty does not cover dam-

ages from abuse, accidental breakage, or units that have been modified, altered, or installed in a manner

other than that which is specified in the installation instructions. Agrowtek Inc. must be contacted prior to

return shipment for a return authorization. No returns will be accepted without a return authorization. This

warranty is applicable only to products that have been properly stored, installed, and maintained per the

installation and operation manual and used for their intended purpose. This limited warranty does not cover

products installed in or operated under unusual conditions or environments including, but not limited to,

high humidity or high temperature conditions. The products which have been claimed and comply with the

aforementioned restrictions shall be replaced or repaired at the sole discretion of the Agrowtek Inc. at no

charge. This warranty is provided in lieu of all other warranty provisions, express or implied. It is including

but not limited to any implied warranty of fitness or merchantability for a particular purpose and is limited

to the Warranty Period. In no event or circumstance shall Agrowtek Inc. be liable to any third party or the

claimant for damages in excess of the price paid for the product, or for any loss of use, inconvenience, com-

mercial loss, loss of time, lost profits or savings or any other incidental, consequential or special damages

arising out of the use of, or inability to use, the product. This disclaimer is made to the fullest extent allowed

by law or regulation and is specifically made to specify that the liability of Agrowtek Inc. under this limited

warranty, or any claimed extension thereof, shall be to replace or repair the Product or refund the price paid

for the Product.

Warranty

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 78 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: