manualshive.com logo in svg

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 36 / 78

Поделиться
Скачать
Agrowtek GrowControl GCX Скачать руководство пользователя страница 36

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

36

Where Used Search

Controls can become complex and when multiple team members work on a system mistakes can be made 

that can become difficult to track down. If a device is not functioning properly the first thing that must be 

considered is how it is being controlled.

The where-used search is designed to help a user identify the control functions that are assigned to a spe-

cific input or output. This can then be used to identify potential sources of problems or ensure the output is 

properly assigned to the correct functions.

To search where an input or output is used:

1. Select the output to search.

2. Press the search icon.

1

2

3. The search results dialog is shown indicating the control group and control function name of any func-

tions using the output or input.

If the same function is using the output for multiple settings, it will be shown for each setting.

Содержание GrowControl GCX















































































Отзывы:

Нет отзывов