Agrowtek GrowControl GCX Скачать руководство пользователя страница 60

Страница: 60 / 78

Irrigation

Multi-stage irrigation controls operate watering stages in a sequential fashion. Each stage may have a

unique irrigation duration and output assignment (output channels do not need to be sequential.) Once all

of the stages have completed, they can be repeated at specific intervals for a specific count.

Irrigation stages can coordinate with an irrigation pump or main supply valve, and can operate a drain valve

output for flood tables between stages.

Irrigation may be triggered based on time of day when the funciton is enabled, or by moisture level if a

moisture sensor is connected.

1. Add Stage

Adds a new irrigation stage to the function setting.

2. Remove Stage Deletes the currently seleted stage from the function settings.

3. Stage Select the stage number to edit or remove.

4. Stage Feed Time

Duration to run the stage output for irrigation.

5. Stage Output Stage output device and channel (irrigation valve.)

6. Repeat Settings

If the irrigation is to repeat, set the number and delay between repeat cycles.

To configure irrigation stages:

1. Press the [ + ADD STAGE ] button (1) and a new stage will be created.

3. Enter a time duration for the stage to irrigate in the STAGE FEED TIME field (4).

3. Select the device and output of the stage to operate the attached irrigation valve (5).

To edit a stage, select the stage number from the stage drop-down (3).

Irrigation Stages

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 60 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: