Agrowtek GrowControl GCX Скачать руководство пользователя страница 10

Страница: 10 / 78

1. Notifications

List of recent notifications from the system.

[CLEAR] will delete messages in the list but they remain in the event log.

2. Main Menu Bar

Select between the four main page displays on the system (see below.)

3. Report Area

Customizable reports by control group display the status of devices and control

functions that are selected to be shown in the report.

4. Report Selection Select a group from the drop-down or use the arrow buttons to page through reports.

5. Logout Button

Press to log-out of the system and show the login screen.

Home

The home page displays a general information overview of the system. The left pane shows recent notifica-

tions from the system. The right pane shows a customizable report by control group/zone. Page between

the different groups to quickly monitor the conditions and I/O status of devices in each group. Devices with

active outputs are highlighted green and sensors in alarm condition are highlighted red for enhanced vis-

ibility.

The main menu bar is located at the bottom of the display and is used to switch between the primary screen

pages. The bar indicates which page is active by highlighting the icon green and darkening the background.

Press the tabs to switch between the screen pages.

1. Home Page

Home screen with customizable report view and system notification history.

2. Devices Page

Device graphs, manual controls, alarms, calibration and management.

3. Controls Page

Workspace and function editor for control logic configuration and monitoring.

4. System Page

Network, email accounts, users, files, updates and system configuration.

Main Menu Bar

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 10 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: