Agrowtek GrowControl GCX Скачать руководство пользователя страница 68

Страница: 68 / 78

Editor Controls

The editor controls is where the recipe is selected and the recipe name can be edited. Recipes can also be

added or removed and the current settings saved to memory.

1
2

4 5 6

1. Recipe Selection

Select the recipe to edit or use the buttons to create or delete recipes.

2. Recipe Name Edit the recipe name to a useful description.

3. Clear Name

Erases the existing name for entry of a new name.

4. Delete Recipe Deletes the currently selected recipe.

5. Add Recipe

Adds a new blank recipe to the system.

6. Save

Saves the current recipe settings to memory.

Targets

Dosing targets are compared to the sensor readings for pH, conductivity (nutrients,) and ORP. If the targets

are outside of the allowed drift range, the recipe will activate the dosing function to take corrective action.

1. Target Enable Enable the switches to turn on dosing modes.

2. Target Value

Target value for the dosing mode.

3. Deadband

Deadband (drift) for the dosing mode.

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 68 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: