Agrowtek GrowControl GCX Скачать руководство пользователя страница 65

Страница: 65 / 78

Nutrient Pumps

The nutrient pumps are assigned by creating a list of dosing pumps; the corresponding recipe part will be

shown in parenthesis. Up to 24 nutrient pumps may be added to the function setting.

To create a list of pumps, use the Add Pump button (6), then modify the pump device (1) and pump head (2)

selection. Add and edit additional pumps until all of the pumps have been added. Adjust the order of pumps

to match the recipe order if necessary by using the sort buttongs (4) to move the selected pump up or down

in the list.

1. Dosing Pump Device

Select the device that has the desired chemical pump head on it.

2. Pump Head

Select the pump head on the pump device.

3. Pump List

List of dosing pumps by pump name (description.)

Corresponding recipe part name is shown in parenthesis.

4. Sort Buttons Use the sort buttons to move the selected pump up or down in the list.

Sort buttons help match the pump order to the recipe order.

5. Delete Pump Deletes the selected pump from the pump list.

6. Add Pump

Adds a new pump to the pump list.

1
2

TIP

To edit the pump assignment, select the pump then modify the pump device or pump head, and save the

settings.

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 65 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: