Agrowtek GrowControl GCX Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 78

Agrowtek GrowControl GCX Скачать руководство пользователя страница 18

© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™

18

Device Alerts

Devices which are capable of reporting alerts (sensor devices) can configure basic high and low level thresh-

old alerts on the device alerts page. These alerts are recorded in the event log and can be emailed or sent by

text message using the system email sender.

To configure an alarm, select the sensor channel and enter the high and low alert values. To disable the high

or low alert, use a value of 0. Check the Enabled box to enable the alert. Alerts will only be sent once each

time they are activated.

1. Sensor Channel

Select the sensor channel to configure the alert limits.

2. High Alert

If sensor value meets or exceeds this value trigger a high-alert.

3. Low Alert

If sensor value meets or falls below this value trigger a low-alert.

4. Enable Checkbox Check to enable the alerts for this sensor channel.

5. Save Button

When highlighted Green, there are changes that are not saved.

Press the Save button to save the changes to system memory.

5

1

2
3

4

«
...
16
17
18
19
20
...
»

Содержание GrowControl GCX















































































Отзывы:

Нет отзывов