Agrowtek GrowControl GCX Скачать руководство пользователя страница 63

Страница: 63 / 78

Tank Level

Water level in a tank can be automated with a high and low sensor, and a fill valve.

Tank level can be controlled for either filling or draining modes.

NOTE

Agrowtek’s SXL optical liquid level sensors are an excellent choice for sensing water

level, or float switches and other sensors are also suitable.

1. Control Mode Fill: Activates when water level is low to return to the high position.

Drain: Activates when water level is high to return the to low postion.

2.Time-out

Time limit for the fill or drain event to prevent over-fill or drain lock-out.

1. High Sensor

Select the input device and channel of the high level sensor.

2. Low Sensor

Select the input device and channel of the low level sensor.

3. Fill (Drain) Output

Select the output device and channel to operate for fill (or drain.)

4. Preview

A preview describes how the settings will behave when enabled.

Mode Settings

Input/Output Connections

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 63 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: