Agrowtek GrowControl GCX Скачать руководство пользователя страница 11

Страница: 11 / 78

Devices Page

The devices page displays all of the relevant data pertaining to GrowNET™ devices that are connected to

the system, and manages all of their properties including reference names, alarm settings, calibration and

manual operation / overrides.

1. Devices Menu Bar Change between the different pages in the devices screen.

2. Page Title Bar

Displays the title of the current page. A help [?] button is located on most title bars.

3. Page Area

Area to display the selected menu bar page; the device monitor page is shown.

4. Device List

The device list shows the name and status of each device.

Select the device to monitor the device or edit the device properties.

1
2

Devices Menu Bar

The devices menu bar selects between the monitoring page and, alarms, calibration and other device prop-

erties pages. The bar indicates which page is active by highlighting the icon green and darkening the back-

ground. Press the tabs to switch between the screen pages.

1. Monitor Page

Display historical data and manually operate control equipment.

2. Info Page

Configure device and output names, report settings and search “where used.”

3. Alarms Page

For devices with alarm settings, configure high/low alarm values.

4. Calibration Page Standard calibration of sensors and dosing pump flow rates.

5. Manage Device

Device manufacturing info, address, sort order, out-of-service mode and more.

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 11 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: