manualshive.com logo in svg

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 47 / 78

Поделиться
Скачать
Agrowtek GrowControl GCX Скачать руководство пользователя страница 47

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

47

Clock Timer

The clock timer is the most basic control function in the system featuring only the basic properties:

• Enable

• Schedule

• Output

Configure the enable and schedule settings, then if desired, set the output to be controlled.

The clock timer function can also be status-only if no output is assigned.

1

2

3

1. Enable Mode 

Select a mode to enable the timer function.

2. Schedule  

Time Range:   Enter the start and end time for the timer function.

Date Range:  Set dates if the setting should be active only during a date range.

3. Function Output  Select a function output type if desired.

A “None” type will not act on an output but will still set a function status.

In the example above, the timer is “enabled” without any pre-conditions. The output named “Output 1” on 

the device named “Dry Contact Relays” will be turned on according to the schedule setting from 7am to 3pm 

(20:00).

Содержание GrowControl GCX















































































Отзывы:

Нет отзывов