Agrowtek GrowControl GCX Скачать руководство пользователя страница 21

Страница: 21 / 78

Device Management

General management for GrowNET™ devices is handled on the device management page including:

• Temporarily taking a device offline for service or maintenance

• Replacing a device

• Changing device display order

• Changing the device address

• Removing a device from the system

• Configuring data logging interval

1. Service Switch

Set a device “out-of-service” so the system does not poll it or show errors.

2. Mgmt Buttons

Buttons to activate various management dialogs; see “setting up devices” section.

3. Logging Options Configure the logging interval and delete logs.

See the “Files” page for more advanced log management.

1. Factory Info

View the production info for a device including serial number, revision, etc.

2. Change Order

Change the order in the device list (also changes polling order.)

3. Change Address Change the device address; sets a new address to the device.

4. Replace Offline

After adding a new device, it can “replace” an offline device to assume its role.

5. De-Comission

When removing a device to be used on another system it should be decomissioned.

Decomissioning removes the device address from the device.

Management Buttons

Содержание GrowControl GCX















































































Результаты поиска

Содержание GrowControl GCX

Отзывы:

Agrowtek GrowControl GCX, Инструкция по эксплуатации, Страница: 21 / 78

Результаты поиска

Содержание GrowControl GCX

Отзывы: