Agrowtek GrowControl GCX Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 78

Agrowtek GrowControl GCX Скачать руководство пользователя страница 39

© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™

39

It is occassionally necessary to pause or suspend all control functions in an environment for maintenance or

other purposes. All controls in a group can simultaneously paused to prevent further commands to outputs

until the group is returned to run mode.

When the control group is paused:

• Functions are suspended in their current status state.

• Any outputs controlled by the functions will no longer be operated by the functions.

• Any dosing pumps will complete their current dose and then suspend dosing.

Run/Pause Mode

1

3

2

Press the run/pause button to open the dialog; confirm you wish to pause the control group execution.

When the control group is paused, the run/pause button (1) and workspace background (3) change to a red

shade to indicate they are stopped. The function icons status dot (2) will turn yellow to indicate it is paused.

«
...
37
38
39
40
41
...
»

Содержание GrowControl GCX















































































Отзывы:

Нет отзывов