manualshive.com logo in svg

Agilent Technologies InfiniiVision 2000 X-Series, Руководство программиста, Страница: 429 / 930

Поделиться
Скачать
Agilent Technologies InfiniiVision 2000 X-Series Скачать руководство пользователя страница 429

:SAVE Commands

24

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

429

 

:SAVE:IMAGe[:STARt]

 (see 

page 790

)

Command Syntax

:SAVE:IMAGe[:STARt] [<file_name>]

<file_name> ::= quoted ASCII string

The :SAVE:IMAGe[:STARt] command saves an image.

See Also

•

"Introduction to :SAVE Commands" 

on page 426

•

":SAVE:IMAGe:FACTors" 

on page 430

•

":SAVE:IMAGe:FORMat" 

on page 431

•

":SAVE:IMAGe:INKSaver" 

on page 432

•

":SAVE:IMAGe:PALette" 

on page 433

•

":SAVE:FILename" 

on page 428

N O T E

Be sure to set the :SAVE:IMAGe:FORMat before saving an image. If the format is NONE, the 
save image command will not succeed.

N O T E

If a file extension is provided as part of a specified <file_name>, and it does not match the 
extension expected by the format specified in :SAVE:IMAGe:FORMat, the format will be 
changed if the extension is a valid image file extension.

N O T E

If the extension ".bmp" is used and the current :SAVE:IMAGe:FORMat is not BMP or BMP8, 
the format will be changed to BMP.

Содержание InfiniiVision 2000 X-Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов