manualshive.com logo in svg

Agilent Technologies InfiniiVision 2000 X-Series, Руководство программиста, Страница: 219 / 930

Поделиться
Скачать
Agilent Technologies InfiniiVision 2000 X-Series Скачать руководство пользователя страница 219

:CHANnel<n> Commands

10

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

219

 

The CHANnel<n> subsystem commands control an analog channel (vertical 
or Y- axis of the oscilloscope). Channels are independently programmable 
for all offset, probe, coupling, bandwidth limit, inversion, vernier, and 
range (scale) functions. The channel number (1, 2, 3, or 4) specified in the 
command selects the analog channel that is affected by the command.

A label command provides identifying annotations of up to 10 characters.

You can toggle the channel displays on and off with the 
:CHANnel<n>:DISPlay command as well as with the root level commands 
:VIEW and :BLANk.

Reporting the Setup

Use :CHANnel1?, :CHANnel2?, :CHANnel3? or :CHANnel4? to query setup 
information for the CHANnel<n> subsystem.

Return Format

The following are sample responses from the :CHANnel<n>? query. In this 
case, the query was issued following a *RST command.

:CHAN1:RANG +40.0E+00;OFFS +0.00;COUP DC;IMP ONEM;DISP 1;BWL 0;

INV 0;LAB "1";UNIT VOLT;PROB +10E+00;PROB:SKEW +0.00E+00;STYP SING

N O T E

The obsolete CHANnel subsystem is supported.

Содержание InfiniiVision 2000 X-Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов