manualshive.com logo in svg

Agilent Technologies InfiniiVision 2000 X-Series, Руководство программиста, Страница: 365 / 930

Поделиться
Скачать
Agilent Technologies InfiniiVision 2000 X-Series Скачать руководство пользователя страница 365

:MEASure Commands

20

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

365

 

:MEASure:TVALue

 (see 

page 790

)

Query Syntax

:MEASure:TVALue? <value>, [<slope>]<occurrence>[,<source>]

<value> ::= the vertical value that the waveform must cross.

The

value can be volts or a math function value such as dB,

Vs, or V/s.

<slope> ::= direction of the waveform.

A rising slope is indicated

by a plus sign (+).

A falling edge is indicated by a

minus sign (-).

<occurrence> ::= the transition to be reported. If the occurrence

number is one, the first crossing is reported.

If

the number is two, the second crossing is reported,

etc.

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<r> ::= 1-2 in NR1 format

When the :MEASure:TVALue? query is sent, the displayed signal is 
searched for the specified value level and transition. The time interval 
between the trigger event and this defined occurrence is returned as the 
response to the query.

The specified value can be negative or positive. To specify a negative 
value, use a minus sign (- ). The sign of the slope selects a rising (+) or 
falling (- ) edge. If no sign is specified for the slope, it is assumed to be 
the rising edge.

The magnitude of the occurrence defines the occurrence to be reported. 
For example, +3 returns the time for the third time the waveform crosses 
the specified value level in the positive direction. Once this value crossing 
is found, the oscilloscope reports the time at that crossing in seconds, 
with the trigger point (time zero) as the reference.

If the specified crossing cannot be found, the oscilloscope reports 
+9.9E+37. This value is returned if the waveform does not cross the 
specified value, or if the waveform does not cross the specified value for 
the specified number of times in the direction specified.

If the optional source parameter is specified, the current source is 
modified.

Return Format

<value><NL>

N O T E

This query is not available if the source is FFT (Fast Fourier Transform).

Содержание InfiniiVision 2000 X-Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов