Agilent Technologies B1542A, Руководство пользователя

Страница: 98 / 162

5- 20 Agilent B1542A User’s Guide, Edition 4
PLSDIV Test Definitions
PLSDIV IdVd
Test Output
The following output parameters are displayed after the test.
Id Drain current, in A.
Vd Target drain voltage, in V.
VdSet Drain voltage, in V. SMU output value.
VdInt Drain voltage, in V. Oscilloscope monitor value.
VdConv Convergence result of the drain voltage automatic adjustment.
Vg Target gate voltage, in V.
VgMon Gate voltage, in V. Oscilloscope monitor value.
VgConv Convergence result of the gate voltage automatic adjustment.
IdPerWg Drain current per unit gate width, in A/
μ
m.
IdPerWg = Id / Wg
VgMon, VdInt, and Id values will be the value obtained at the data extraction timing
on the pulse top. See Figure 5-9.
VdConv and VgConv returns 0 (convergence condition is satisfied) or
-
1 (not
satisfied). If the automatic adjustment is OFF, 0 is returned.
If the drain voltage automatic adjustment function is ON, VdInt will be close to Vd.
And if the function is OFF, VdSet will be close to Vd.
If the gate voltage automatic adjustment function is ON, VgMon will be close to Vg.
And if the function is OFF, Vpgu-out will be close to Vg.
Figure 5-3 Test Output Parameters
'
6
*
6KXQWUHVLVWRU=
9G6HW
9G,QW 9G6HW=,G
,G
9J0RQ
9SJXRXW
3*8
608
6XE