Agilent Technologies B1542A, Руководство пользователя

Страница: 85 / 162

Agilent B1542A User’s Guide, Edition 4 5- 7
PLSDIV Test Definitions
PLSDIV DC IdVd
PLSDIV DC IdVd
This test definition controls SMUs to force the drain voltage and the gate voltage,
measures the drain current, and displays the Id-Vd characteristics.
Device Parameters The following parameters are available to set the test condition.
Polarity Polarity of source output. Nch (force the specified value) or Pch
(force the negative specified value).
Lg Gate length, in m.
≥
1 nm, 4 digits or 1 nm resolution.
Wg Gate width, in m.
≥
1 nm, 4 digits or 1 nm resolution.
Temp Temperature, in degree. 4 digits or 0.001 degree resolution.
IdMax Maximum drain current measurement range, in A. 0 to 80 mA,
4 digits or 1
μ
A resolution.
Test Parameters
The following parameters are available to set the source output.
CableR Residual resistance of the gate measurement path from SMU to
terminator.
≥
0
Ω
, 4 digits or 1 m
Ω
resolution.
TermR Resistance of terminator.
≥
1 m
Ω
, 4 digits or 1 m
Ω
resolution.
TermR=No applies 1E+30
Ω
.
Gate SMU connected to the gate terminal.
VgStart Secondary sweep start voltage for the gate terminal.
-
10 to 10
V, 4 digits or 10 mV resolution.
VgStop Secondary sweep stop voltage for the gate terminal.
-
10 to 10
V, 4 digits or 10 mV resolution.
VgStep Secondary sweep step voltage for the gate terminal.
-
10 to 10 V,
5 digits or 1 mV resolution.
Drain SMU connected to the drain terminal.
VdStart Primary sweep start voltage for the drain terminal.
-
10 to 10 V,
4 digits or 10 mV resolution.
VdStop Primary sweep stop voltage for the drain terminal.
-
10 to 10 V,
4 digits or 10 mV resolution.
VdStep Primary sweep step voltage for the drain terminal. - 10 to 10 V,
5 digits or 1 mV resolution.