©
Agilent Technologies 1989–2002
Agilent 3070 / 79000 Site Preparation
4-5
Chapter 4: Site Preparation – Structural Requirements: Floor Requirements
straps for system operators. The testhead has
external connectors for wrist straps.
■
Anti-static DUT storage. Plan for anti-static tote
bins for your devices-under-test and storage for
anti-static bags.
■
Anti-static hardware. Consider the use of any
devices that will help you maintain a static-free
environment. Examples are wrist strap testers and
ion generators.
It is a good idea to take a look at your current static
conditions before planning the installation of your
system.
Immobilization for the EFS Board Handler
For 3070 / 79000 family board test systems, it is
normally sufficient to use the built-in leveling pads to
stabilize the system. However, if the system includes
the 44990A EFS Board Handler in an automated test
cell, the integration specialist will need to bolt the
testhead to the floor. Also if local building codes
require equipment to be anchored to the floor due to
potential seismic activity (earthquakes), you will need to
bolt the system to the floor. The shipping brackets used
to secure the system to the pallet are suitable for this
purpose, but you will need to supply fasteners suitable
for your situation.
A floor mount kit is sent with the 44990A EFS Board
Handler. The kit is intended for mounting the testhead
to a concrete floor. If you mount the system to a
different type of floor, you can still use the brackets
provided with the kit, but you will need to furnish bolts
or other fasteners. See the
44990A EFS Board Handler
Manual
, 44990-90004, for more detailed information.
