AGCO LELY RPC 130 F, Оригинальное руководство оператора

Страница: 43 / 168

The pivoted roller will move to the front of the
machine when the hydraulic line, to open the
tailgate, has pressure. During baling the pivoted
roller will be in the front position.
GUID-09A3BAC1-8B5D-419D-9A9F-B48EAB963FE4-high.jpg [High]
Fig. 5
The pivoted roller will move to the rear position for
tying the bale with net. The valve will operate the
change of position. When the valve operates, the
spring pulls the roller to the rear of the machine.
The valve operates by electronics. It is possible to
manually operate the valve.
GUID-EC7CF457-C904-46A8-8DAF-EBC1B6B46B03-high.jpg [High]
Fig. 6
In machines with dual tying (net and twine) the
roller is in the rear position. With the ball valve not
open, as shown the roller will not move to the
position at the front of the machine.
GUID-502E6ED2-F360-458B-9D33-3043D960F758-high.jpg [High]
Fig. 7
2.3.14 Bale Transfer
When the tailgate opens the bale rolls out on to the bale transfer. The bale transfer can tilt hydraulically.
From the tilted bale transfer the bale rolls on to the wrapping table.
2.3.15 Wrapper
The primary parts of the wrapper are the:
• Wrapping table
• Wrapping ring
• Stretch unit
• Film knife.
GUID-EB82025E-38DE-478C-AB0E-A75E7CDBA75E [V1]
GUID-B0617EF3-6EFD-4DFD-A378-685D772D4F31 [V1]
2. Introduction
Baler Wrapper Combination 43
4900.LE.EN01