AGCO LELY RPC 130 F, Оригинальное руководство оператора

Страница: 59 / 168

Tuning page
1. Push or to make adjustments.
2. Push to go back to the “Advanced Machine Setup” or to go to the Home page.
The selection will save automatically when you go from this page.
Setting Unit Minimum-Maximum Default value
Near full alert. cm (in) Off/0-50 (Off/0-20) 5 (2)
Units of size before full bale size is reached. The display will show the bale size indication graphic in
yellow. Make the selection of Off if you do not want to see the bale indicator change from green to
yellow.
Setting Unit Minimum-Maximum Default value
Soft core stop at bale
size %.
% 0-100 64
Size of the soft core, this is a percentage of the of the normal bale. Switch the soft core on or off.
Setting Unit Minimum-Maximum Default value
Net delay. Seconds. 0.0-5.0 1.5
Interval time for the net to start wrapping automatically after you get the correct bale dimension.
Setting Unit Minimum-Maximum Default value
Net clutch time. Seconds. 3.0-8.0 4.0
Active time for the net clutch.
Setting Unit Minimum-Maximum Default value
Net roller delay. Seconds. 0.0-5.0 2.0
The length of time the movable net roller is on, before the net clutch engages.
Setting Unit Minimum-Maximum Default value
Bale shape fine tuning:
RPC 160 V.
- "ON / "OFF". -
If the bale shape indicator comes "ON", fine adjustment is necessary to the shape of the bale, set this
value to “ON”.
2. Introduction
Baler Wrapper Combination 59
4900.LE.EN01