AGCO LELY RPC 130 F, Оригинальное руководство оператора

Страница: 51 / 168

Advanced menu.
(B) Data about the current bale
1. Bale dimension indicator (cm, only RPC 160 V).
2. Target bale size (cm, only RPC 160 V).
3. Bale dimension indicator (RPC 160 V) or bale density indicator (RPC
130 F).
4. Target bale size (line, only RPC 160 V).
In this picture the diameter of the target bale dimension is 125 cm (49
in) and at this time the bale diameter is 34 cm (13 in).
On the RPC 130 F the target (adjusted) density is always when the
indicator is full.
Numbers do not show with the RPC 130 F.
The dimension indicator will change colour when
the bale dimension gets larger.
(1) Green, bale in operation.
(2) Yellow, bale is almost at the target dimension
(only shows when “Near full alert” feature is on).
(3) Red, bale is at the target dimension.
(4) Red, bale larger than the set dimension.
GUID-79B4D651-F600-4384-9F9A-327AF99C915C-high.jpg [High]
Fig. 12
(C) Button
Button to show the field name and other data.
(D) Data about the field
The selection you make in advanced settings will show this possible
data:
“Field name” = Name of the field you enter.
“Field bales” = Number of bales made on this field.
“Field hours” = Number of hours you did work on this field.
“Bales / hr” = Speed of baling.
“Total bales” = Total number of bales made with this machine.
“Total hours” = Total number of hours operated with this machine.
“Density” = Indicates the set density of the bale.
“Wrapper RPM”= Indicates the RPM during the wrapping process.
Indicates number of film layers set, when roller control is "ON".
indicates the number of revolutions of the wrapping ring, when
roller control is "OFF".
(E) Buttons on the right to start or change the operation of the machine
2. Introduction
Baler Wrapper Combination 51
4900.LE.EN01