AGCO LELY RPC 130 F, Оригинальное руководство оператора

Страница: 55 / 168

Setting Unit Minimum - Maximum Default/Advised
Bale deposit. - Single/ Double/ Signal. -
Single: One bale is automatically released during driving.
Double: Two bales released during one stop, the wrapped bale stays on the machine until the subsequent
bale completes the tying procedure during a stop.
Signal: One bale automatically releases during a stop when the next bale is tied.
Setting Unit Minimum - Maximum Default/Advised
Wrapper. - Active/ Pass through. -
Selection to use the wrapper or pass the bale through the wrapper (without wrapping the bale in film).
Setting Unit Minimum - Maximum Default/Advised
Film layer. - 4 - 24 6
Number of film layers applied to the bale.
This adjustment is only shown and adjustable when Roller control is "ON".
Setting Unit Minimum - Maximum Default/Advised
Effective film width. cm 40-75 63
Width of the film after stretching and wrapping on the bale. For example width
on roll = 75 cm, width on bale = 62 cm
This adjustment is only shown and adjustable when Roller control is "ON".
Setting Unit Minimum - Maximum Default/Advised
Film overlap. % 55% or 70% 55%
Overlap percentage of the film wrap
This adjustment is only shown and adjustable when
“Roller control”= ON.
Setting Unit Minimum - Maximum Default/Advised
Revolutions per bale. - 6-48 12
The number of revolutions the film wrap is applied to the bale.
This adjustment is only shown and adjustable when Roller control is "OFF".
2. Introduction
Baler Wrapper Combination 55
4900.LE.EN01