92
Control Throws
1. The amount of control throw should be adjusted
using mechanical means as much as possible and
then electronically with the radio. The control
throws are shown in degrees and inches of deflec-
tion measured at the widest point of the control
surface for both low and high rates.
2.
Use the supplied flight control deflection meter to
measure the throws in degrees
. Prop up the tail
of the aircraft until the fuselage is parallel to
the table top.
3. Use the widest part of the aileron/flap to measure
the aileron/flap throw in degrees or inches.
4. Use the widest part of the elevator to measure the
elevator throw in degrees or inches.
5. Gather the Rudder Deflection Meter (
Supplied
)
and scotch tape.
6. Slide the deflection meter under the rudder boost
tab.
