55
Engine Installation
1. The 100cc Carbon Cub SS will accept a wide
range of engine types. The DLE 111 engine
with MTW TD75H Canisters, was used for the
test flights. Gather the following items needed
for engine installation:
Required Parts
◊
24 - 1/4” Aluminum Engine Standoffs
◊
2 - Plywood Engine templates for:
DLE 111, DA 100/120
Or
Universal Template
Required Parts -Not Included
◊
1 - 100cc-120cc Engine: DLE 111 Shown
◊
4 - 1/4x20 Engine Mounting Bolts
◊
4 - 1/4x20 Lock Nuts
◊
4 - 1/4” Diameter Fender Washers
◊
4 - 1/2” Diameter Fender Washers
◊
Required Tools and Adhesives
◊
1 - Pencil
◊
1 - Masking Tape
◊
1 - Electric Drill
◊
1 - 1/4” Drill Bit
◊
1 - Socket Wrench w/ 7/16” Socket
◊
1 - 7/16” Open End Box Wrench
ENGINE INSTALLATION
2. Locate the laser cut engine mounting template
for the DLE111, DA 100/120. If other engines
are used the Universal template may be modified
for any mounting pattern.
3. Align mounting template with firewall and tape
in place. Use the laser etched engine thrust lines
to align the template.
Mounting distance from front of
firewall to front of engine prop hub:
7 7/16”