30
6. Mount rudder control horns using six wood
screws.
7. Repeat the above steps for mounting the remain-
ing rudder control horn.
8. Feed one rudder cable through the pre installed
cable exit tube in the rear of the fuse toward the
front of the fuse. Repeat for other side.
Note:
Loop or tape cable to fuse to prevent cable
from being pulled into fuse.
9. Pull the rudder cables from rear of fuse to the
rudder servo tray.
Note:
Cables run parallel down fuse and do not
cross each other.
10. Thread brass coupler half way into ball link.
