58
4. Install the throttle servo as shown.
5. Use a Phillips head screw driver to remove the
phenolic arm attached to the carb.
6. Assemble the ball link and threaded coupler,
install ball link to phenolic arm as shown.
Note:
If using stock mufflers, it may be necessary to
trim the 4-40x16mm bolt so it does not come
in contact with the muffler.
7. Reinstall phenolic arm to carb at this time. Use
blue loctite on mounting bolt to ensure it will not
loosen from vibration.
Remove
Trim remaining portion of bolt
if using standard mufflers.
