Screw motor to motor mount using socket head screws and washers.
Note:
It makes sense to install the motor using socket head screws. This will make it
easier to remove the motor, once the RC support structure has been installed.
Place sub deck 26 flat on the building
board, fit support structure in place on
sub deck and check for proper fit. Apply
glue and secure with suitable weights.
When glue has dried, remove assembly from building board and turn
over. Assemble RC platforms from parts 27, 28, 29 and glue in place on
either side of sub deck.
Apply two coats of sanding sealer to assembly before it is installed into
hull.
Note:
Side panels and RC platforms have openings to accomodate
leads for electronic components.
If necessary, the side panels can be opend up along the RC platforms to
make acces to the platforms easier.
17
18
19
26
27
28
29
Содержание 3033/00
Страница 1: ...aero naut S dersand Order No 3033 00...
