Aeronaut 3033/00, Руководство по сборке

Страница: 36 / 44

Install wheelhouse floor 166 in
wheelhouse, assemble parts 167 to
170 to build up the desk and glue
into wheelhouse.
Glue wheel and engine telegraph to
wheelhouse floor, using respective
collars around base of columns.
57
166
168
167
169
170
149
150
151
153
154
155
152 152
156
157
158
159
160
161
163
164
162
162
165
Drill wheel column 149 with 1.5 mm and cut to length
wheel axe 150 from 1.5 mm brass wire (10 mm).
Carefully round off contours of wheel 151 and stain or
paint as desired. Then assemble and glue as illustrated.
Apply clear varnish to wheel to protect surfaces of
wood and brass parts.
Assemble engine telegraph as
illustrated and glue to column 157
with bracket 158.
Note: Cut out dial 162 and glue in
place between parts 160 and 161.
55
56