Build up the wheelhouse upside down on the building
board.
Assemble and glue sub structure from parts 75, 76 and
77.
Attention:
Make sure you install parts 76 correctly!
Tabs on underside of wheelhouse need to point in same
direction.
Remove any excess glue and carefully sand over contact surfaces of
wheelhouse. Then glue wheelhouse to centre of roof 78.
Place mahogany panelling against sub structure of wheelhouse and
check for proper fit. Then glue in place panelling 79 (left/right) and
80 (front/rear) on sub structure.
Apply two coats of sanding sealer to inside and outside of
wheelhouse. A coat of clear varnish may be applied to mahogany
panels to improve appearance.
Side view
Front
Rear
13
14
75
76
80
79
78
77
Содержание 3033/00
Страница 1: ...aero naut S dersand Order No 3033 00...
