Aeris CompuMask, Руководство по эксплуатации

Страница: 98 / 149

98
POST DIVE SURFACE MODE
When you ascend to 2 FT (0.6 M), the CompuMask will enter Surface Mode and begin
counting your Surface Interval.
TRANSITION PERIOD
If you descend during the first 10 minutes after surfacing (referred to as the Transition
Period), time underwater will be considered a continuation of that dive. The time at the
surface (if less than 10 minutes) will not be added as Dive Time.
During the Transition Period, the SURF ALT 1, ALT 2, and LOG screens for that dive can be
accessed. Other screens/modes (e.g., Plan, Fly, Sat, Hist, Set) will be accessible after 10
minutes on the surface.
Information on the surface includes (Fig. 89):
> TLBG (Left Bar with TL icon), and accumulated segments if any
after a NOR or FRE dive.
> Battery icon (shell with lid), if a CompuMask Low Battery
Warning Condition exists, flashing if Too Low.
> Surface Interval (hr:min, colon flashing) with SI icon.
> Tank Pressure with PSI (or BAR) and Link icons, if
the Receiver is successfully Linked with an active Transmitter.
> Nx icon, if FO2 is set for a Nitrox (numerical value).
> Dive Number (lower/left)
> Graphic Nor (indicating Normal Mode).
Fig. 89 - SURF TRANSITION
PERIOD