manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 10

10

INTRODUCTION

Welcome to AERIS and thank you for choosing the CompuMask !

It is extremely important that you read this Operating Manual in sequence and understand

it completely before attempting to use the CompuMask as a dive computer.

It is equally important that you read the AERIS Dive Computer Safety and Reference

Manual (Doc. No. 12-7203) provided with your CompuMask.  It contains information that

you must become familiar with prior to diving with your CompuMask.

Remember that technology is no substitute for common sense, and a dive computer only

provides the person using it with data, not the knowledge to use it.

General Interface and Human Factors

The Mask provides a watertight face seal and comfort level during SCUBA or FREE dives.

The Mask and its components will not interfere with or degrade the user's capability to use

underwater communication or acoustic system headsets that mount over the user's ear(s).

Straps and Strap Adjustments allow for quick and easy donning and doffing of the Mask

as would be done with a typical sport diving Mask.

Mask electronics are activated by manual button operation or by water activation (if set

ON, a predefined user setting).

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды