manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 100

100

AFTER THE TRANSITION PERIOD (> 10 MINUTES)

Once the Transition Period has ended, you will then have full access to other Modes (e.g.,

GAU SURF, FRE SURF, PLAN, FLY, SAT, LOG, HISTORY, SET, etc.).

  Press the S (Side) button to toggle the Backlight.

  Depress the A (Top) button as required (4 seconds each time) to access GAU and FRE.

NOR SURF MAIN > GAU SURF MAIN > FRE SURF MAIN

  Press/release the A (Top) button as required to access SURF ALT 1, ALT 2, PLAN, etc.

NOR SURF MAIN > ALT 1 > ALT 2 > PLAN > FLY > SAT > LOG > HIST

>  The Planning Sequence now displays adjusted No Decompression Limits based on

residual nitrogen and accumulated oxygen calculated to be remaining from the

previous NOR and/or FRE dives.

>  The Time to Desaturate (SAT) counter provides calculated time for tissue desaturation

at sea level.

>  If a Violation occurred during the dive, the SAT screen (Desaturation Time) will not be

displayed.

>  After 2 hours on the surface, the FLY and SAT screens will alternate until the

CompuMask shuts Off after 24 hours.

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды