manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 47

47

SET CONSERVATIVE FACTOR, information includes (Fig. 35):

>  Graphic CONS (Conservative)

>  Set Point ON (or OFF), flashing

>  NDC icon

  Pressing and releasing the S (Side) button (< 2 seconds each

time) will toggle between ON and OFF.

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will save the setting and/or advance to the SET

SAMPLING RATE screen with the Set Point flashing.

  Pressing and releasing the A (Top) button repeatedly (< 2

seconds each time) will step through the other SET U

screens.

  Depressing the A (Top) button for 2 seconds will save the

setting and revert to the SET U screen.

  If no button is pressed for a period of 2 minutes, operation

will revert to the NOR (or GAU) SURF MAIN screen.

NOTE:  When the Conservative Factor is set ON,

the No Decompression Dive Time Limits are re-

duced to values equivalent to those that would

be available at the next higher 3000 foot (915

meter) Altitude.  Refer to the tables in the back

section of the manual.

Fig. 35 - SET CONSERVA-

TIVE FACTOR

NDC =

No Deco Dive Time

Remaining

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды