manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 40

40

SET DTR (DIVE TIME REMAINING) ALARM,

information includes (Fig. 27):

>  Graphic dtr (meaning Dive Time Remaining)

>  Set Point value (hr:min) flashing.

>  OTR, ATR, and NDC icons.

  Pressing and releasing the S (Side) button momentarily (< 2

seconds each time) will increase the Set Point from 0:00 to

0:20 (:minutes) in 1 minute (0:01) increments.

  Depressing and holding the S (Side) button will scroll

through the Set Points at a rate of 4 Set Points per second

until it is released.

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will save the setting and/or advance to the SET

TURN PRESSURE ALARM screen with the Set Point flashing.

  Pressing and releasing the A (Top) button momentarily and

repeatedly (< 2 seconds each) will step through the other

SET A screens.

  Depressing the A (Top) button for 2 seconds will save the

setting and revert to the SET A screen.

  If no button is pressed for a period of 2 minutes operation

will revert to the NOR (or GAU) SURF MAIN screen.

Fig. 27 - SET DTR ALARM

NDC = No Deco Time

ATR = Air Time

OTR = O2 Time

Whichever Time

decreases to the Alarm

Set Point will activate

the Alarm.

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды