manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 53

53

  Depressing and holding the A (Top) button for 2 seconds

will save the setting and revert to the SET T screen.

  If no button is pressed for a period of 2 minutes, operation

will revert to the NOR (or GAU) SURF MAIN screen.

SET DATE (Year, Month, and Day)

Displayed numerically will be the Month and Day (or Day and

Month if set for metric) and the YEAR Set Point flashing (Fig. 41).

  Depressing and holding the S (Side) button will scroll

through the YEAR Set Points in 1 year increments at a rate of 4 per second from

2007 to 2050 (with leap year corrections).

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will save the

YEAR Set Point and/or advance to SET MONTH with the Set Point flashing.

  Depressing and holding the S (Side) button will scroll through the MONTH Set Points

in 1 month increments at a rate of 4 per second from 1 to 12.

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will save the

Month Set Point and/or advance to SET DAY with the Set Point flashing.

  Depressing and holding the S (Side) button will scroll through the DAY Set Points in

one day increments at a rate of 4 per second from 1 to 31.

  Pressing and releasing the A (Top) button momentarily (< 2 seconds) will save the

Time/Date Set Points and revert to the SET T screen.

  If no button is pressed for a period of 2 minutes, operation will revert to the NOR (or

GAU) SURF MAIN screen.

Fig. 41  - SET DATE

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды