Aeris CompuMask, Руководство по эксплуатации

Страница: 133 / 149

133
Transmitter Battery Removal
Before opening the Transmitter's Battery Compartment, inspect
the Housing to ensure it is not cracked or damaged.
 Locate the Battery Cover on the End of the Housing.
 Apply a coin (not a screwdriver) to the recessed slot of the
Cover (Fig. 118) and while exerting slight inward pressure,
turn it counter clockwise out of the Housing.
 Remove the Battery from the Battery Compartment and
discard according to local regulations governing disposal of
Lithium batteries.
 Closely check all of the sealing surfaces for any signs of damage that might impair
proper sealing.
 Inspect the Housing (inside and outside) to ensure it is not cracked or damaged, and
for any signs of corrosion indicating entrance of moisture into the unit.
WARNING: If damage or corrosion is found, DO NOT attempt to use
the Transmitter until it has received proper service.
 Remove the Battery Cover O-ring and inspect it for any signs of deterioration or
deformity. DO NOT use tools to remove the O-ring.
 O-ring replacement is highly recommended to ensure proper sealing.
 If it is necessary to clean the Battery Compartment, flush it and all components with a
solution of 50% white vinegar and 50% fresh water. Rinse with fresh water, and allow
to dry overnight, or blow dry with a hair dryer (set at 'no heat').
Fig. 118 - TRANSMITTER
BATTERY COVER
REMOVAL