manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 39

39

SET TLBG (TISSUE LOADING BAR GRAPH) ALARM,

information includes (Fig. 26):

>  Graphic tLbG (meaning Tissue Loading Bar Graph) and

MAX icon

>  TLBG (Left Bar with TL icon) with Set Point (segments),

flashing

  Pressing and releasing the S (Side) button momentarily (< 2

seconds) will decrease the Set Point from All 5 segments

(Deco) to 1 in decrements of 1 segment.

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will save the setting and/or advance to the SET

DTR (Dive Time Remaining) ALARM screen with the Set

Point flashing.

  Pressing and releasing the A (Top) button repeatedly (< 2

seconds each) will step through the other SET A screens.

  Depressing the A (Top) button for 2 seconds will save the

setting and revert to the SET A screen.

  If no button is pressed for a period of 2 minutes operation

will revert to the NOR or GAU SURF MAIN screen.

Fig. 26 - SET TLBG ALARM

Setting the TLBG

Alarm to activate

before the

CompuMask enters

DECO is highly

recommended.

FREE Dive Mode has

a separate (fixed)

TLBG Alarm.

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды