manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 77

77

CONTROL OF DISPLAYS

During Dive Modes, there is a Main (Default) Display of important information relevant to

the specific mode that the CompuMask is operating in (No Deco, Deco, GAU, FRE, etc.).

Alternate (ALT) Displays can be accessed by pressing and releasing the A (Top) button to

view additional information.  They will automatically revert to the Main Display after 5

seconds unless the A (Top) button is pressed again to view another Alternate Display.

  DIVE MAIN > ALT 1 > ALT 2 (only if Nitrox) > ALT 3

Alarms can be acknowledged/silenced by pressing the A (Top) button for 2 seconds.

The S (Side) button is used to toggle the Backlight On/Off.

  When Alarms strike, the Backlight will come On if set Off and remain On until the

Alarm condition clears.

  The Backlight will not activate during a Low Battery condition.

WET CONTACTS

The Wet Contact Dive Mode Activation feature is active when it is set ON.  The

CompuMask is configured with contacts that will automatically activate Dive Mode when

the space between the contacts is bridged by a conductive material (immersed in water)

and it senses a Depth of 5 FT (1.5 M) for 5 seconds.

When the Wet Activation feature is set OFF, the CompuMask will not enter Dive Mode

upon descent unless it is first Activated by push button and operating in one of the Dive

Computer modes (menus) at that time, a mode such as Surface, Fly, Log, etc.

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды