manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 61

61

During the first 2 hours after a dive -

  while the NOR SURF MAIN screen is displayed after an AIR or FRE dive, pressing

and releasing the A (Top) button 4 times (< 2 seconds each time) will access the SAT

screen (SURF MAIN > ALT 2 > PLAN > FLY > SAT), or -

  after a NOR Nitrox dive, pressing and releasing the A (Top) button 5 times will access

the SAT screen  (SURF MAIN > ALT 1 > ALT 2 > PLAN > FLY > SAT).

Two hours after a NOR or FRE dive, the SAT screen will alternate with the FLY screen until

the CompuMask shuts Off 24 hours after the last dive.  When operating in FREE Dive

Mode, the SAT screen can be viewed by first accessing the NOR SURF MAIN screen.

TIME TO DESAT, information includes (Fig. 48):

>  Graphic SAt

>  Countdown Time (hr:min).

>  Battery icon (shell with lid), if a Low Battery Warning

Condition exists, flashing if Too Low.

  Pressing and releasing the A (Top) button momentarily (< 2

seconds) will access the LOG Preview screen.

  The display will revert to the NOR SURF MAIN screen after

2 minutes of no button action.

  Pressing the S (Side) button will toggle the Backlight.

Fig. 48  - DESATURATION

TIME

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды