manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 130

130

BATTERY REPLACEMENT

NOTE:  The procedures that follow must be closely adhered to.  Dam-

age due to improper Battery replacement is not covered by the

CompuMask's 2 year warranty.

The Battery Compartment(s) should only be opened in a dry and clean environment with

extreme care taken to prevent the entrance of moisture or dust.

As an additional precautionary measure to prevent formation of moisture in the Battery

Compartment(s), it is recommended that the Battery(s) be changed in an environment

equivalent to the local outdoor temperature and humidity (e.g., do not change the

Battery(s) in an air conditioned environment then take it outside during a hot sunny day).

If there is any sign of moisture in the CompuMask or Transmitter, DO NOT attempt to use it

for diving (NOR, GAU, or FRE Mode) until it receives proper service by the AERIS factory.

WARNING:  When the Battery is removed, Settings will revert to

factory default values and have to be reentered, and nitrogen loading

and oxygen accumulation used for calculations for repetitive dives

will be erased.

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды