manualshive.com logo in svg

Aeris CompuMask, Руководство по эксплуатации

Поделиться
Скачать
Aeris CompuMask Скачать руководство пользователя страница 67

67

While operating in History Mode, presses of the S (Side) button

will not toggle the Backlight.

HISTORY 1, information includes (Fig. 53):

>  Graphic HiSt

>  Total Hours of Elapsed Dive Time up to 9999 with EDT icon

>  Total number of All NOR (and GAU) dives recorded up to

999 with No icon (No meaning Number)

  Pressing and releasing the S (Side) button momentarily (< 2

    seconds) button will advance to the HISTORY 2 screen.

  If no button is pressed during a 2 minute period, operation

will revert to the NOR (or GAU) SURF MAIN screen.

HISTORY 2, information includes (Fig. 54):

>  Maximum Depth achieved during any NOR (or GAU) dive

with FT (or M) and MAX icons

>  Graphic EL - 2 to EL - 7, indicating the highest Altitude (>

3,000 feet) at which a NOR (or GAU) dive was conducted.

(EL meaning elevation).  No indication means SEA Level.

>  Temperature with degrees icon and graphic F (or C), lowest

ever recorded during any NOR (or GAU) dive

  Pressing and releasing the S (Side) button momentarily (< 2

seconds) button will advance to the NOR (or GAU) SURF

MAIN screen.

Fig. 54 - HISTORY 2

Fig. 53 - HISTORY 1

Содержание CompuMask






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды