AEQ CAPITOL Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 104

background image

AEQ

CAPITOL

Ultra-compact digital audio mixer

84

The lower part of the “Programmable Keys” submenu will show the associated options for
“Multiplex” type keys, when this configuration mode is selected. In order to be able to configure
the programmable key (or edit a previously created configuration), you have to press the “

Edit

”

button, to active and allows you to assign to that key one of the 8 available “MPX” buses:

These keys works as follows: when you press and keep pressed the key you can activate the
routing toward the associated “MPX” bus of any audio input channel assigned to a fader at that
moment. To activate that routing, you just have to press the “

SELECT

” key of the desired

channel/s (the associated LED turns on) while programmable key is pressed; by pressing again
the “SELECT” key that routing is deactivated (the associated LED turns off). When you stop
pressing the programmable key, the activated “SELECT” keys turns off and they recover its
original function.

4.3.2.6. Configuration of

“

Cue Reset

”

programmable key.

“Cue Reset” option allows you to configure a programmable key as a key to disconnect
immediately all the signal sendings to the CUE bus at that moment. A key set to this function is
assigned with a dedicated icon.

The lower part of the “Programmable Keys” submenu will show no options when this
configuration mode is selected.

The activation of this “Cue Reset” function will have the following result in AEQ CAPITOL
control surface: when the key is pressed, all the circuits or channels being sent to the CUE bus
of the mixer will be disconnected and the LEDs of all the “CUE” keys that may be active will be
turned off.

4.3.2.7. Configuration of

“

Orders

”

programmable keys.

Programmable keys that are set to “Orders” enables you to send the orders microphone to the
selected output channel. A key set to this function is assigned with a dedicated icon.

The lower part of the “Programmable Keys” submenu will allow you to configure the output
associated to the programmable key. In order to be able to configure the programmable key (or
edit a previously configured key), you have to press the “

Edit

” button, to active and allows you

to assign to that key any of the outputs defined in the system.

«
...
82
83
84
85
86
...
»

Содержание CAPITOL









































































































Отзывы:

Нет отзывов

Похожие инструкции для CAPITOL

Бренд: Hamilton Beach Страницы: 24

Бренд: Yamaha Страницы: 21

Бренд: Feider Machines Страницы: 12

Бренд: Plush Страницы: 7

Бренд: Studio Technologies Страницы: 27

Бренд: Valcom Страницы: 11

Бренд: Omnitronic Страницы: 20

Бренд: WAGNER Страницы: 20

Бренд: Maestro Страницы: 8

Бренд: CONSTRUCTA Страницы: 14

Бренд: AEG Страницы: 36

Бренд: AEG Страницы: 48

EASYCOMPACT STM5200

Бренд: AEG Страницы: 24

PREMIUMLINE 7 Series

Бренд: AEG Страницы: 24

Бренд: JVC Страницы: 68

Бренд: Panasonic Страницы: 18

Бренд: BeON Страницы: 16

Бренд: Dash Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды