AEQ
CAPITOL
Ultra-compact digital audio mixer
22
•
Maximum power: 100mW at 40 ° C.
•
Requires external power.
Associated electronic with opto-coupled GPO
In order to make installation process easier, AEQ offers specific pre-fabricated cable kits for
AEQ CAPITOL data input/output within the optional modules range: CP CAB GPIO, consisting
in a male DB15 connector soldered to a 6 meters long cable with no connectors at the other
end. For more information please check chapter 2.2.6 of this manual.
GPO Outputs (SUB-D female, 15 pins):
Pin Signal Pin Signal
1 GPO1 9
GND_GPO1-4
2 GPO2 10
GND_GPO1-4
3 GPO3 11
GND_GPO1-4
4 GPO4 12
Not
connected
5 GPO5 13
GND_GPO5-8
6 GPO6 14
GND_GPO5-8
7 GPO7 15
GND_GPO5-8
8 GPO8
Please note that there is a common ground (GND) for outputs 1 to 4 and another one for
outputs 5 to 8.
Upon request, this wiring kit can be supplied with connectors explicitly specified by the
customer. For more information please refer to AEQ sales department or authorised distributors.
2.2.2.1.3. Physical contact GPO.
As previously stated also, AEQ CAPITOL includes 4 GPO with relay closing contacts on the
DB15 female connector labelled “
RELAYS
” at the back of the engine.
Specifications:
•
Contact closure relay.
•
Maximum current: 1 A @ 30 v. DC, 0.3 A @ 125 V AC.
•
Maximum voltage: 60 V DC or 125 v. AC.
•
Maximum power: 30 VA.
Associated electronic with physical contact GPO
