AEQ
CAPITOL
Ultra-compact digital audio mixer
11
2.1.1.7. Fader.
100mm. fader. The fader travel is printed with 11 bands, the maximum output level +22dB
corresponding to the last, and the third band from above to +0dB or nominal operating level.
Both of these marks are differentiated in size from the rest.
Detail of 100mm fader calibration
The response mode of the fader is logarithmic, producing great attenuation of the level at the
bottom of the fader travel and less adjustment at the top.
The bottom position of the fader travel triggers gain -
∞
dB or absence of signal.
2.1.2. Control and monitoring section.
The control and monitoring section (C&M) of the control surface is located to the right. This
section enables the overall management of the signals on the system, including routing and
control processes, as well as monitoring of the signals used in developing the final program, by
means of the VU-Meters, and CUE control.
This control and monitoring section is divided into four main areas:
•
Control VU meters:
allows you to monitor visually the level of the audio signals from
the master output and the CUE bus (or the control monitoring bus, when there are no
channels sent to CUE).
•
Programmable keys:
dedicated buttons with special functions defined through the
configuration software.
•
Main screen:
it displays the internal menus. This section also incorporates contextual
keys and encoders.
•
Studio, Control and Talk-back monitoring:
where you can manage the audio signals
sent to the headphones and speakers, for the control room and the studio room, as well
as the talk-back functions for the intercom for both areas.
+22dB
+0dB
