AEQ
CAPITOL
Ultra-compact digital audio mixer
30
“
ANALOG IN 1-4
”
connector
“
ANALOG IN 5-8
”
connector
Pin Signal Pin Signal
1 IN1+ 9 IN1-
2 GND 10 GND
3 IN2+ 11 IN2-
4 GND 12 GND
5 IN3+ 13 IN3-
6 GND 14 GND
7 IN4+ 15 IN4-
8 GND
“
ANALOG IN 9-12
”
connector
Pin Signal Pin Signal
1 IN9+ 9 IN9-
2 GND 10 GND
3 IN10+ 11 IN10-
4 GND 12 GND
5 IN11+ 13 IN11-
6 GND 14 GND
7 IN12+ 15 IN12-
8 GND
In order to make installation process easier, AEQ offers specific pre-fabricated cable kits for
AEQ CAPITOL audio input/output, both analog and digital, as well as studio headphones: FR
CAB INP, consisting in a male DB15 connector soldered to 4 balanced and shielded 6 meters
long paired cables with no connectors at the other end, for 4 inputs or outputs. For more
information please check chapter 2.2.6 of this manual.
AEQ can upon request provide fully finished cables and in special lengths. For more information
please refer to AEQ sales department or authorised distributors.
All 12 mono inputs can be configured, pair by pair, as 6 stereo inputs, depending on the
particular application or installation, using the cofiguration software. For more information
please check chapter “4.2.3. I/O Configuration submenu”
of this manual.
2.2.3.5. Analog outputs.
AEQ CAPITOL includes 8 mono line-level outputs, electronically balanced, available through 2
female DB15 connectors identified as “
ANALOG OUT 1-4
” and “
ANALOG OUT 5-8
”.
Analog Outputs (SUB-D female, 15 pins):
Pin Signal Pin Signal
1 IN5+ 9 IN5-
2 GND 10 GND
3 IN6+ 11 IN6-
4 GND 12 GND
5 IN7+ 13 IN7-
6 GND 14 GND
7 IN8+ 15 IN8-
8 GND