AEQ
CAPITOL
Ultra-compact digital audio mixer
34
2.2.4.2. CA33 telephone hybrid optional module.
At the back panel of AEQ CAPITOL, integrated double digital telephone hybrid module
connectors can be found, labelled as “
HYBRID-1
” and “
HYBRID-2
”. This interface is not
equipped by default unless option “
CA33: DOUBLE DIGITAL TELEPHONE HYBRID
MODULE
” has been purchased.
If you acquire this option (“CA33: DOUBLE DIGITAL TELEPHONE HYBRID MODULE”) later
on, simple instructions will be enclosed with the module, allowing easy installation by any
person with minimal experience in handling of electronic equipment or computers.
CA 33 has enough capacity to handle two independent phone lines. It has two RJ11
connectors, labelled “
LINE
” to connect the physical phone lines, and two more, labelled as
“
SET
” for loop connections to both external telephone terminals where dialing actions will be
performed.
RJ11 connector
Control and configuration of the signals present in this CA33 module are performed using the
configuration software. For more information, please refer to chapter “4.2. Hardware
Configuration menu” of this manual.
If CA 33 option is not purchased and external compatible communication devices are used, you
can control them using the programmable key section of AEQ CAPITOL control surface. For
more information, please refer to section “4.3.2.4. Configuration of Codec programmable keys”
of this manual.
2.2.5. Control headphones.
AEQ CAPITOL includes an output for a professional headphone set at the
front
of the audio
engine, using a TRS ¼” unbalanced 6,3 mm jack.
This output is labelled “
HEADPHONES
”.
Common GND
Right
Left
