AEQ
CAPITOL
Ultra-compact digital audio mixer
83
For
Phoenix Studio
or
Stratos
audio-codec, the available configuration options are:
•
“
Ring
”
:
allows you to select the GPI where the incoming call signal provided by the
codec is wired. The key starts to blink when there is an incoming call. This function can
be combined in the same key with any of the following four functions.
•
“
Call GPO
”
:
selects and configures the physical GPO output associated to “CALL”
function. The key turns on when activated and makes the call from the corresponding
channel.
•
“
On Air GPO
”
:
selects and configures the physical GPO output associated to “ON AIR”
function. The key turns on when activated and puts the call on the air (ON AIR mode).
•
“
Line
”
:
for dual line codecs such as Eagle and Phoenix Studio, this identifies the
integrated line 1 and line 2, to assign the different GPIs and GPOs for remote control.
•
“
OK
”
:
allows you to accept the created or edited configuration.
•
“
Cancel
”
:
allows you to reject the created or edited configuration. No change you may
have made is saved.
IMPORTANT NOTE:
The functions “Call GPO” and “On Air GPO” are exclusive between them
(a programmable key can have only one of the two functions associated).
4.3.2.5. Configuration of
“
Multiplex
“
programmable keys.
Programmable keys that are set to “Multiplex” enables you to make a quick management of
signal routing toward a “MPX” type internal summing bus (these buses are typically used for
sending to codecs, hybrids or other auxiliary destinations). A key set to this function is assigned
with a dedicated icon.
4
