AEQ CAPITOL, Руководство пользователя

Страница: 80 / 104

AEQ CAPITOL
Ultra-compact digital audio mixer
80
4.3.2.4. Configuration of
“
Codec
”
programmable keys.
Programmable keys that are set to “Codec” enables you to assign functions associated with
remote control of external communications equipment (such as audio-codecs) through
associated GPIs and GPOs. A key set to this function is assigned with a dedicated icon.
The lower part of the “Programmable Keys” submenu will show the associated options for
“Codec” type keys, when this configuration mode is selected.
In order to be able to configure the programmable key (or edit a previously created
configuration), you have to press the “
Edit Configuration
” button, to active and allows you to
configure the following fields:
•
“
Device
”
:
shows a list of pre-programmed devices in the “Codec” function. The
available options are:
o
“
CA33
”
:
optional internal dual digital telephone hybrid module of AEQ
CAPITOL. For more information see section 2.2.3.5 of this manual.
o
“
TH02
”
:
digital telephone hybrid AEQ TH02EX. For more information please
consult the AEQ website.
o
“
Eagle
”
:
ISDN audio-codec AEQ EAGLE. For more information please consult
the AEQ website.
o
“
Phoenix
”
:
IP/ISDN audio-codec AEQ PHOENIX Studio or Stratos. For more
information please consult the AEQ website.
Depending on the particular equipment selected, the following options may vary. For
CA33
module, the available configuration options are:
•
“
Ring
”
:
the key starts to blink when there is an incoming call. This function can be
combined in the same key with any of the following three functions.
•
“
Extended
”
:
enables the option of frequency extender for the CA33 telephone hybrid.
The key turns on when activated.
•
“
Line
”
:
selects which of the two CA33 lines that key is configured for.
•
“
Wait
”
:
allows you to put the call on hold (you can send audio to the telephone line, but
the audio from the line is not received in the console). The key turns on when activated.
•
“
OnAir
”
:
allows you to put the call on the air (you can send audio to the telephone line
and the audio from the line is received in the console). The key turns on when activated.
•
“
OK
”
:
allows you to accept the created or edited configuration.
•
“
Cancel
”
:
allows you to reject the created or edited configuration. No change you may
have made is saved.
IMPORTANT NOTE:
“Extended”, “Wait” and “OnAir” functions are exclusive between them (a
programmable key can have only one of the three options associated), although any of them
can be combined in the same key with “Ring” function.